1. If the leak of the water tank is not more than 1mm crack or du2mm hole, add the strong plugging agent of the water tank to the water tank to start the car. The strong plugging agent will follow the water cycle to reach the rubber tube and various pads. If there is water leakage, it will stop leaking. After stopping the leak, it does not need to be released, which will not affect heat dissipation and blockage.
2. When there are no other things around, the individual radiator pipes may leak slightly. You can temporarily put the loose tobacco into the water tank, and use the water circulation pressure to block the tobacco in the leaking part of the radiator pipe for temporary use.
3. If the rubber pipe joint is leaking, use a screwdriver to wrap the rubber pipe joint clamp twice on the rubber pipe joint and tighten it with pliers. If the rubber tube is damaged, tape the broken place tightly and use it temporarily.